| Products | current location:Home>>Product |
| typespecification | ZK6-D1-8 | ZK6-D2-8 | ZK6-D3-8 | ZK6-D3-10 | ZK6-D4-8 |
| Number of spindle | 8 | 8 | 8 | 10 | 8 |
| Spindle taper hole | Mobitz type 1 | mobitz type 1(2 ) | mobitz type 2 | mobitz type 1(2 ) | mobitz type 3 |
| The largest diameter of drill (mm) |
Cast iron φ14 | Cast iron φ17 | Cast iron φ22 | Cast iron φ18 | Cast iron φ25 |
| teel φ11 | Steel φ14 | 9 Steel φ19 | 5 Steel φ15 | 22 Steel φ22 | |
| Processing range | (φ380)φ280(φ230) | (φ380)φ280(φ230) | (φ380)φ280(φ230) | (φ380)φ280(φ230) | (φ380)φ280(φ230) |
| 330×160 | 330×160 | 330×160 | 330×160 | 330×160 | |
| Distance between spindle faces and work table (mm) |
220-460(470-710) | 220-460(470-710) | 220-460(470-710) | 220-460(470-710) | 220-460(470-710) |
| Work table (mm) | 600×550 | 600×550 | 600×550 | 600×550 | 600×550 |
| Distance between central axis line andguide rail (mm) |
290 | 290 | 290 | 290 | 290 |
| Rotate speed of spindle (r/min) (Frequency stepless speed regulation) |
500-1000 | 500-1000(100-500) | 100-500 | 500-1000(100-500) | 100-500 |
| Total length of feed-through(mm) |
(300、230)200 | (300、230)200 | (300、230)200 | (300、230)200 | (300、230)200 |
| Feed-through movement | Hydraulic pressure drive stepless speed regulation |
Hydraulic pressure drive stepless speedregulation |
Hydraulic pressure drive stepless speed regulation |
Hydraulic pressure drive stepless speed regulation |
Hydraulic pressure drive stepless speed regulation |
| Minimum distance of spindle |
48(38/33/30) | 48(38/33/30) | 48(38/33/30) | 48(38/33/30) | 48(38/33/30) |
| Main motor(kw) | YCT160-4B3 | YCT180-4A4 | YCT200-4A5.5 | YCT200-4A5.5 | YCT200-4B7.5 |
| Hydraulic motordrive(kw) | Y90L-41.5 | Y90L-41.5 | Y90L-41.5 | Y90L-41.5 | Y90L-41.5 |
| Weight(kg)(except hydraulic station) |
～2400 | ～2450 | ～2500 | ～2550 | ～2600 |
| type specification | ZK6-D4-10 | ZK6-D4-12 | ZK6-D4-14 | ZK6-D4-16 |
| Number of spindle | 10 | 12 | 14 | 16 |
| Spindle taper hole | Mobitz type 2 | Mobitz type 2 | Mobitz type 1 | Mobitz type 1 |
| The largest diameter of drill (mm) |
Cast iron φ21 | Cast iron φ18 | Cast iron φ14 | Cast iron φ14 |
| Steel φ18 | Steel φ15 | Steel φ11 | Steel φ11 | |
| Processing range | (φ380)φ280(φ230) | (φ450)φ280(φ380) | (φ450)φ280(φ380) | (φ450)φ280(φ380) |
| 330×160 | 330×160 | |||
| Distance between spindle faces and work table (mm) |
220-460(470-710) | 220-460(470-710) | 220-460(470-710) | 220-460(470-710) |
| Work table (mm) | 600×550 | 600×550 | 600×550 | 600×550 |
| Distance between central axis line and guide rail (mm) |
290 | 290 | 290 | 290 |
| Rotate speed of spindle (r/min) (Frequency stepless speed regulation) |
100-500 | 500-1000 (100-500) | 500-1000 | 500-1000 |
| Total length of feed -through(mm) |
(300、230)200 | (300、230)200 | (300、230)200 | (300、230 )200 |
| Feed-through movement |
Hydraulic pressure drive stepless speed regulation |
Hydraulic pressure drive stepless speed regulation |
Hydraulic pressure drive stepless speed regulation |
Hydraulic pressure drive stepless speed regulation |
| Minimum distance of spindle |
48(38/33/30) | 48(38/33/30) | 48(38/33/30) | 48(38/33/30) |
| Main motor(kw) | YCT200-4B7.5 | YCT200-4B7.5 | YCT200-4B7.5 | YCT200-4B7.5 |
| Hydraulic motor drive(kw) | Y90L-4 1.5 | Y90L-4 1.5 | Y90L-4 1.5 | Y90L-4 1.5 |
| Weight(kg) (except hydraulic station) |
～2650 | ～2700 | ～2750 | ～2800 |
